Dimensional Inspection in medical Injection Molding

Cnmoulding11 Jul, 2025Technology

We produce medical stents for our international clients. However, due to the use of different tools, there have been deviations in the dimensions of the stents, which do not meet the required specifications. As they are current 2.54 mm in diameter and client need to be 2.44 mm in diamete.But it is not the wrong size, but the deviation caused by different measuring tools. After many measurements, it is proved that this position can not be measured with calipers, because the edge of the hole is sharp, and the strength is slightly larger, you can measure the size of the hole, and the best way is to measure it with a gaugeical Injection Molding